CLS Open Source Software
Source code for open source files are available for download from: http://exshare.lightsource.ca/OpenSource.
CLS makes extensive use of EPICS software from other facilities. As part of the international EPICS collaboration, CLS also makes EPICS software available to other institutions. These drivers are used extensively in the CLS Accelerator and Beamline Control System.
EPICS RS-232 Drivers
EPICS RS-232/485 drivers are based on the use on the use of a the generic ASCII serial line driver.
Driver |
Status |
Documentation |
|
Canberra ADM-606MC Portable Digital Multi-function Radiation Meter |
In use as area monitors. |
Tony Wilson |
To be added |
Danfysik System 8000 Series Magnet Power Supplies |
In use on BR1 and magnet mapping facility. |
Glen Wright |
To be added |
Granville-Phillips GP375 Convectron Vacuum Gage |
In use on beamlines and front-ends. |
Glen Wright |
To be added |
Health Physics Instruments HPI 2010 Ionization Chamber Monitor |
In use as special purpose monitors. |
Tony Wilson |
To be added |
Health Physics Instruments HPI 2080 Pulse Neutron Monitor |
In use as special purpose monitors. |
Tony Wilson |
To be added |
IE Power CLS Custom Magnet Power Supplies |
In use on BTS and SR1. |
Glen Wright |
To be added |
Keithley 2000 Series Volt Meter |
In use on SR1 PCT and magnet mapping facility. |
Tony Wilson |
To be added |
Keithley 6485 pA-meter |
In use on all beamlines. |
Tony Wilson |
To be added |
Kontrol RPM-PLUS Power Switch |
In use for timing system |
Glen Wright |
To be added |
MicroImage Video Systems CL741 Four Line CrossLine Generator |
In use on Linac and LTB1. |
Hao Zhang |
To be added |
National Instruments FP-1000 series Field Point Distributed IO (support for FP-TC-120, FP-RTD-122, FP-RLY-420, FP-DI-301, FP-DI-330, FP-DI-401) |
In use on Linac, SR1, and CMCF, HXMA beamlines. |
Tony Wilson |
To be added |
Ontrack Control Systems AVR8000 Video Switch |
In use on Linac. |
Hao Zhang |
To be added |
Puls-Plasmatechnik CLS Custom Kicker Pulsed Power Supplies (2kV to 23kV) |
In use on BR1 Injection, BR1 Extraction and SR1 Injection. |
Glen Wright |
To be added |
Varian Dual and MidiVac Controller VacIon Power Supply |
In use on BR1, BTS, SR1, and all beamlines. |
Glen Wright |
To be added |
EPICS GPIB Drivers
Driver |
Status |
Documentation |
|
Agilent Technologies 66000A Modular Power Supply System /w 66102A and a 66105A |
In use on SR1 insertion device corrector coils |
Tony Wilson |
To be added |
EPICS VME Drivers
VME crates are normally controlled through the use of SIS fibre optic bridges and the CLS VME Crate Interface Software.
Driver |
Status |
Documentation |
|
CAEN V792N CAEN charge integrating ADC, 16 channels |
In use on LTB1 and SR1 for spill monitors. |
Russ Berg |
|
CAEN V820 Scaler, 32 channels |
In use of LTB1 and BR1 and SR1 for spill monitors. |
Russ Berg |
|
Dynatem DPC104 3U PC/104 Card Controller for VME |
Used for interfacing to absolute encoders on insertion devices. |
Tony Wilson |
To be added |
Hytec Electronics Ltd 2508 32 Channel 16bit ADC |
In use in the magnet mapping facility and several beamlines. |
Russ Berg |
To be added |
ICS ICS 110 (CLS) 24 bit sampling ADC, 32 channels |
In use on BR1 and SR1 BPMs. |
Russ Berg |
|
0MS VME58 motor controller |
In use on most beamlines. |
Russ Berg |
To be added |
Sensoray 118 8 channel 16-bit A/D for thermocouples, RDT's, strain gauges, voltage inputs, 4-20 mA, thermistors, and resistors |
In use on SGM, PGM, HXMA, OSR, and magnet mapping. |
Glen Wright |
To be added |
Struck SIS3820 Scaler - 32 channels |
In use on SGM, PGM, HXMA and SM. |
Glen Wright |
To be added |
VMIC 2536 VMIC Digital IO module, 32 channels |
In use on storage ring orbit correction and insertion devices. |
Russ Berg |
Contact Elder Matias to learn more about control and instrumentation at the Canadian Light Source.
Last modified: 2013-05-03 16:05:27